Jump to content
IL-2 Series Forum

Recommended Posts

StormCrow
Posted

Здравствуйте. Проблема такая:  все шесть самолетов, которые есть в игре, начиная с определенной (как по мне далеко не максимальной скорости) задирают нос при том что триммер тангажа уже выставлен в 100% на пикирование. По итогу я лечу, постоянно держа ручку от себя, причем на нормальный такой угол от себя. А это форс фидбек джой, хоть и не особо мощный, но рука устает.  Это задумано так или я что-то делаю не то?

BlitzPig_EL
Posted

This sounds like a joystick calibration issue to me.  I can trim out any plane in the sim to fly straight and level.

StormCrow
Posted

Calibration is ok in my opinion.  Besides, i set a 5% dead zone on Y axis. But i`ll try my old VKB Gladiator will it have an issue

image.jpeg

StormCrow
Posted (edited)

Ok, this is definitely a Moza AB-9 issue 🥺 I`ve tried my old NXT Gladiator and it trims flawlessly. 

UPD

When i disabled FFB in the game - the issue is no more. So its not about calibration its about FFB signals/settings

Edited by StormCrow
Posted

Это проблема ффб в корее, это не проблема мозы или любого другого ффб джойстика. Сломано ффб тримирование на всех самолетах и не правильно работает силовая нейтраль, разработчикам известно об этих проблемах, но будет ли это исправлятся не известно)

StormCrow
Posted
Только что, Shwed сказал:

Это проблема ффб в корее, это не проблема мозы или любого другого ффб джойстика. Сломано ффб тримирование на всех самолетах и не правильно работает силовая нейтраль, разработчикам известно об этих проблемах, но будет ли это исправлятся не известно)

Методом научного тыка я почти решил проблему. Убрал эффект центровки пружины в 0 и отключил Adaptive centering compensation в адвансд настройках Moza cokcpit. Ручка полегчала, нос так уже не задирает, а остальные эффекты FF остались. Всяко лучше чем полностью отключать форс фидбек. 

Posted

Достаточно не брать силовую нейтраль из ффб игры, и пользоваться софтверными мозовскими тримерами. Но это костыли.

StormCrow
Posted
2 минуты назад, Shwed сказал:

Достаточно не брать силовую нейтраль из ффб игры, и пользоваться софтверными мозовскими тримерами. Но это костыли.

Не могу я софтверными, у меня ручка VKB Gunfighter прицеплена на мозу через переходник. База не поймет что я нажимаю кнопки триммера.

Posted

а разве на мозе не любые кнопки можно назначить на эти тримера, только с родной ручки?)

StormCrow
Posted
31 минуту назад, Shwed сказал:

а разве на мозе не любые кнопки можно назначить на эти тримера, только с родной ручки?)

вроде только с родной. мозовский софт ведь видит только то что база передает ему. если на базу не идет сигнал с родной ручки - и софт его не увидит.

Posted (edited)

Hi,

I don't have any such problems. However, there is one issue - Moza doesn't officially support IL-2 Korea yet:

I hope both companies will reach an agreement. This will make it easier for us, the users, to play with both the Moza's FFB and IL-2 Korea. IL-2 GB is officially supported, so the same would work for now.

The question is, are you running some other profile that's misreading Direct Input data from IL-2 Korea? Check which profile you're using, or create your own (mine is an example below). Telemetry is not supported yet (they need to work something out) so you don't have to mess around there.

F16CSmH.jpg

bhuMKIK.jpg

YFkULag.jpg

Of course, also indicate in IL-2 Korea that you have a joystick with FF.

 

Edited by YoYo
  • Like 1

Home cockipt: GPU RTX5090, CPU i7 13900, RAM 64Gb.Webmaster of yoyosims.pl. VR flying only.

Yoyosimsbanner-(1).gif

Posted

Generally, I will also add (if you write about it) that initially the stick in the airplane in the parked mode or at rest at the airport (runway, not move) with the Moza base and the trim engaged is directed forward. However, it straightens out as you gain speed (moving air). The elevator are acting on it, and that's okay (in real life he would probably lie on his side or backwards, not necessarily forwards) however, the forces in motion act on it, so everything is fine.

B14C6mi.jpg

If it annoys you, turn off the hardware trim:

JU1wLRr.jpg

although you will lose the joystick movement during the trim option which is a great feature in Moza bases!

Btw. I keep my fingers crossed for the official launch and cooperation between 1C and Moza for IL-2 Korea, the same like it was with IL-2 GB! 👍

  • Like 1

Home cockipt: GPU RTX5090, CPU i7 13900, RAM 64Gb.Webmaster of yoyosims.pl. VR flying only.

Yoyosimsbanner-(1).gif

StormCrow
Posted
9 часов назад, YoYo сказал:

If it annoys you, turn off the hardware trim:

Holy cow! This was the only option set to OFF (i mean hardware trim). I turned it ON and the problem is gone. I would never thought that it would have an effect:) Thank you for sharing your profile.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...